Benecar is the official V2C representative in Portugal

Electric mobility does not end when choosing a car. For anyone who drives an electric vehicle or plug-in hybrid, finding a practical and intelligent charging solution adapted to their routine is equally important.

With this vision in mind, Benecar - Cidade do Automóvel is announcing a new stage in its commitment to sustainable mobility: Benecar is now an official V2C representative in Portugal, a brand specialising in the development of smart chargers for electric vehicles.

This partnership allows Benecar to provide advanced charging solutions to customers throughout the country, reinforcing the company’s commitment to more complete, efficient and future-ready mobility.

A partnership that follows the evolution of electric mobility

The growing presence of electric and plug-in hybrid vehicles on Portuguese roads has created new needs for drivers. Choosing the right car is no longer enough. It is equally important to understand where, when and how it can be charged.

The partnership with V2C reflects Benecar’s aim to provide a more complete solution for anyone considering switching to electric mobility or already using an electrified vehicle on a daily basis.

A home charger can make charging more convenient, enable better management of the available energy and allow users to schedule charging sessions for the most suitable times.

According to E-REDES, a wallbox can provide charging power ranging from 3.7 kW to 22 kW, while charging from a conventional socket is normally carried out at approximately 2.3 kW. The actual charging time will always depend on the vehicle, battery, electrical installation and power used.

For anyone taking their first steps in this area, we have also prepared a complete guide explaining what a wallbox is, how it works and what it is used for.

Who is V2C?

V2C is a technology company specialising in the design and production of smart chargers for electric vehicles.

Since 2015, the brand has developed equipment using Spanish and European technology, with the aim of reducing the time and costs associated with charging. Its strategy focuses on innovation, sustainability, smart energy management and integration between electric vehicles, homes and solar power generation systems.

According to information published by the brand, V2C has already sold more than 20,000 units and is present in 25 countries. The company stands out particularly for developing solutions that allow users to control charging, monitor consumption, schedule charging sessions and automatically adjust the power used.

Rather than simply supplying energy to the vehicle, V2C chargers are designed to manage that energy intelligently.

It is precisely this combination of technology, energy efficiency and ease of use that makes V2C a brand aligned with Benecar’s vision for the future of mobility.

V2C Trydan: smart charging for everyday use

The V2C Trydan available from the Benecar online store is a solution particularly suited to home charging for electric and plug-in hybrid vehicles.

The equipment is available from the Benecar online store in two versions:

• V2C Trydan single-phase, 230 V, with a maximum charging power of 7.4 kW;

• V2C Trydan three-phase, 400 V, with a maximum charging power of 22 kW.

In both configurations, the current can be adjusted between 6 and 32 amps per phase. The power actually used will always depend on the electrical installation, the vehicle’s onboard charger and the selected configuration.

One of its main features is dynamic power control. This technology allows the charger to automatically adjust the energy supplied to the vehicle according to the electricity being consumed in the home.

In practice, when other household appliances are consuming more energy, the charger can temporarily reduce the power used by the vehicle. When household consumption decreases, it can increase the charging speed again. This makes it possible to use the available power more effectively and reduce the risk of exceeding the contracted power limit.

The Trydan also includes Wi-Fi and Bluetooth connectivity and can be controlled through the free V2C Cloud platform. Among other functions, the application allows users to:

• Schedule charging sessions;

• Choose the most convenient charging periods;

• Adjust the charging intensity;

• View consumption data and statistics;

• Lock or unlock the equipment;

• Monitor charging in real time.

The equipment is also compatible with the OCPP 1.6 JSON protocol, home automation systems such as Home Assistant and the Alexa virtual assistant.

For users with solar panels, the Trydan offers photovoltaic integration features that make it possible to use surplus energy generated by the installation. Different operating modes can be configured, prioritising solar energy or combining it with energy supplied by the grid.

V2C Trydan Pro: enhanced connectivity and user management

The V2C Trydan Pro available from the Benecar online store retains the main capabilities of the Trydan while adding features designed for more demanding or shared environments.

Like the Trydan, the Trydan Pro is available from the Benecar online store in two versions:

• V2C Trydan Pro single-phase, 230 V, with a maximum charging power of 7.4 kW;

• V2C Trydan Pro three-phase, 400 V, with a maximum charging power of 22 kW.

The power actually used will always depend on the characteristics of the electrical installation, the available power and the charging capacity supported by the vehicle.

In addition to Wi-Fi and Bluetooth connectivity, the Trydan Pro can communicate through Ethernet and 4G, including a SIM card for mobile connectivity. This flexibility allows the charger to remain connected even in locations where Wi-Fi coverage is insufficient or where a wired connection is preferable.

The equipment also includes RFID and NFC readers, making it easier to identify and authorise different users. This feature can be particularly useful in:

• Companies;

• Offices;

• Hotels;

• Condominiums;

• Fleets;

• Shared car parks;

• Commercial premises.

Through V2C Cloud, it is possible to manage multiple users, assign RFID cards, restrict access and view detailed information about the charging sessions carried out. The Trydan Pro also includes a front LCD screen, OCPP 1.6 JSON communication and integration with smart assistants and home automation platforms.

According to V2C, the Trydan Pro is integrated with the Mobi.E network, a particularly relevant feature for certain professional and shared applications in Portugal.

Trydan or Trydan Pro: which one should you choose?

The choice between the Trydan and the Trydan Pro will mainly depend on the installation location and how the charger will be used.

Both the Trydan and Trydan Pro are available in a 7.4 kW single-phase version and a 22 kW three-phase version. The main difference between the two models is therefore not their maximum power, but the additional connectivity and management features offered by the Trydan Pro.

The Trydan is well suited to the needs of most private users who want to charge their vehicle at home, manage schedules, monitor consumption and integrate charging with solar panels.

The Trydan Pro adds more comprehensive connectivity and tools for identifying and managing multiple users, making it particularly suitable for companies, commercial premises, tourist accommodation, car parks and locations where the charger will be shared.

In both cases, these are smart and configurable charging solutions designed to adapt to different energy requirements.

V2C chargers available from the Benecar online store

Through this partnership, Benecar now provides V2C solutions to customers throughout the country, regardless of whether they purchased their vehicle from Benecar.

To view the available equipment, simply visit the Benecar online store. The following products can currently be viewed and ordered directly:

• V2C Trydan, available in 7.4 kW single-phase and 22 kW three-phase versions;

• V2C Trydan Pro, available in 7.4 kW single-phase and 22 kW three-phase versions.

Important note: Benecar exclusively sells the equipment, and no installation or fitting service is included. Installation must be arranged by the buyer and carried out by a specialised and duly qualified technician, in accordance with the characteristics of the electrical installation, the manufacturer’s instructions and all applicable regulations.

Customers looking for another V2C charger, accessory or configuration can contact Benecar directly. The team will help process the request and identify the most suitable solution.

Becoming an official V2C representative in Portugal marks another step in Benecar’s evolution as Cidade do Automóvel: a place where customers can find not only vehicles, but also solutions that help make mobility simpler, smarter and ready for the future.